Testimonial

Coating Durability Auto Body Repair and Paint; Remove spilled paint from coated floor, not the floor coating

We are pleased to inform you that we have applied your product "SEAL-IT 429 S.T.U.F." at the following units of our factory with utmost success. Thanks to "SEAL-IT 429 S.T.U.F.", the need to use stainless steel in corrosive environments has been eliminated to a great extent. Besides, protective effect of "SEAL-IT 429 S.T.U.F." on building floors and walls that are exposed to acids and similar corrosive chemicals has significantly helped to reduce construction maintenance and repair costs.

Fields of application:

Dye-House Floor: "SEAL-IT 429 S.T.U.F." coating which was initially applied at a certain part of the dye- house floor has not shown any sign of damage for longer than a year. Subject coating has been successfully protecting the concrete floor from the effects of acidic environment (65% acetic acid).

Upon this successful result, all floors in dye preparation and print application section of newly established sample carpet print unit have been covered with "SEAL-IT 429 S.T.U.F.".

Mixing Unit Pipelines: These pipes and flap valves (through which moist fibres pass) have been applied "SEAL-IT 429 S.T.U.F.". After application of the product, problems due to moisture have been eliminated. Success of the coating is being continuously observed for the last 9 months.

Covering Unit Cylinders: Cylinders whose paint coats were previously swelling and cracking in a short time due to exposure to the effects of dense vapour have been applied "SEAL-IT 429 S.T.U.F.". although a periods of 4 months has passed after application of the product, still there are no signs of damage, wear, swelling or cracking on the paint coats.

Waste Water Treatment Plant: In this plant, all metallic components which are in direct contact with waste water have been coated with "SEAL-IT 429 S.T.U.F.". A thick layer of rust has formed on certain metal surfaces which were left uncoated for test purposes whereas coated surfaces still keep their original appearance.

Acid Protection Wet Cell (Battery) Maintenance; protect work bench and shop floor from battery acid

As you know, our business involves rebuilding forklift batteries. Battery acid (97% sulfuric acid) gets spilled on our unprotected concrete floors and metal equipment in the area. The acid had eaten into the concrete and metal. Your people filled the hole in the concrete then coated the concrete and metal with 429 S.T.U.F. two years ago. Much acid has been spilled since, but the 429 S.T.U.F. is not showing any signs or damage. Nothing that has been coated with 429 S.T.U.F. is damaged by the acid.

Acid Protection Textile Industry; multiple uses, concrete and metal,acid protection

We are pleased to inform you that we have applied your product "SEAL-IT 429 S.T.U.F." at the following units of our factory with utmost success. Thanks to "SEAL-IT 429 S.T.U.F.", the need to use stainless steel in corrosive environments has been eliminated to a great extent. Besides, protective effect of "SEAL-IT 429 S.T.U.F." on building floors and walls that are exposed to acids and similar corrosive chemicals has significantly helped to reduce construction maintenance and repair costs.

Fields of application:

Dye-House Floor: "SEAL-IT 429 S.T.U.F." coating which was initially applied at a certain part of the dye- house floor has not shown any sign of damage for longer than a year. Subject coating has been successfully protecting the concrete floor from the effects of acidic environment (65% acetic acid).

Upon this successful result, all floors in dye preparation and print application section of newly established sample carpet print unit have been covered with "SEAL-IT 429 S.T.U.F.".

Mixing Unit Pipelines: These pipes and flap valves (through which moist fibres pass) have been applied "SEAL-IT 429 S.T.U.F.". After application of the product, problems due to moisture have been eliminated. Success of the coating is being continuously observed for the last 9 months.

Covering Unit Cylinders: Cylinders whose paint coats were previously swelling and cracking in a short time due to exposure to the effects of dense vapour have been applied "SEAL-IT 429 S.T.U.F.". although a periods of 4 months has passed after application of the product, still there are no signs of damage, wear, swelling or cracking on the paint coats.

Waste Water Treatment Plant: In this plant, all metallic components which are in direct contact with waste water have been coated with "SEAL-IT 429 S.T.U.F.". A thick layer of rust has formed on certain metal surfaces which were left uncoated for test purposes whereas coated surfaces still keep their original appearance.

Protects from Corrosion Ice Melter Manufacture; preserve infrastructure from salt corrosion

Ossian Inc. is a performance ice melter manufacturing company that uses many different chloride blends. Corrosion is a major factor in our business. Our metal storage buildings do not stand up well unless they are protected.

We first used Seal-It 429 S.T.U.F. in March of 2001 to coat and preserve our buildings against the corrosive effects of the salt. 429 S.T.U.F. works better than anything we have tried before and now when we put up a new storage building, it is coated with "429" before any salt is trucked in.

Protects Automotive Repair Garage Automotive Repair Garage; concrete preservation and cleanability

My last purchase was in September of 2000 and I couldn't be more pleased with you products. I used the 429 S.T.U.F. in my automotive repair garage.

The garage was built with an 18 foot "grease pit" which I had coated with "429". I had searched the internet for protective coatings when I came across www.seal-it.ca. I wanted to prevent automotive fluids from penetrating the concrete and also to make clean up any grease, oil, antifreeze, etc. easy and thorough. 429 S.T.U.F. has proven very durable and meets or exceeds your website claims. Nothing gets through 429.

I used Seal-It Concrete Sealant in 2000 also. This sealant was used on the driveway leading to my auto repair garage. Vehicles waiting for repair frequently leave oil spills. But on the treated concrete, when clean up is done soon after the spill, no stain remains. It is an excellent barrier to moisture.

Automotive Shop Floor Warehouse, Warehousing

Grandwest Ent. Inc. Has used 429-S.T.U.F. Floor Paint since 1989. We had just completed a 22,000 sq. ft. building and we had a dusting problem with the concrete floor. We tried concrete sealer. We used four 45 gal. Drums with no benefit. We considered a 2 part epoxy but it cost more than the floor itself.

Then We tried 429-S.T.U.F. and simply painted it on and it proved to be very effective.

Since 1989 we have added 16,000 sq. ft. Every square foot of our premises is painted with 429-S.T.U.F. In addition we are presently constructing a 20,000 sq. ft. expansion. It too will have a concrete floor painted with 429-S.T.U.F.

It goes without saying, we feel it is an excellent product.

Protection from water damage

Just wanted to let you know that I am impressed with the performance of your wood cleaning and sealing products.

The building in the pictures was built about 12 years ago. I used a pine tongue and groove, installed vertically, as siding. The siding was coated with a “urethane” product at that time.

The wall you see in the pictures is about 5 or 6 feet from our gravel back alley. Water lays in this alley near the building, and, over the years there has been a lot of water splashed on the wall, plus any rain.

In the pictures you can see 3 distinct bands of color, the top of the wall seems to have some of the urethane coating still hanging on, below that the wood is quite “bleached”. The bottom 4 feet or so is black from rot. I hadn’t decided what I was going to do to with the wall, but expected to either have to replace the pine or cover it with vinyl siding.

I would say after seeing what your products have done, I won’t have to do either.

New deck? Friends think so!

We have lived in our home for over 25 years. It has a huge wrap around wood deck which must be pressure washed every other year followed by deck preservative. This year we recently used the SEAL-IT MAINTENANCE CLEANER and SEAL-IT WOOD SEALANT preservative. A friend who hadn’t visited us for 8 or 9 years stepped onto the porch and said “I see you have a new porch”.

It did look like a new porch. The SEAL-IT cleaner and sealant proved to be very effective in drawing out the imbedded dirt and allowed the natural color of the wood to emerge. We are very pleased with the result.

Looks new all summer

It looks like a brand new deck, before I called you it was dirty with green and black mold.

You came early in the morning to prepare the deck for cleaning; when I came home after work it was cleaned. After two years, just a light pressure wash in the spring and it looks new all summer.

Log Home Protection Log homes, wooden shakes; long term protection

I used SEAL-IT Wood Sealant when my log house was built in 1989. I varnished the exterior with one coat every two years using a garden sprayer. North Side of house and where the logs are in the shade, I have no need to re-varnish and it has not been re-varnished since 1991.

Pine shakes were used as shingles and some were showing signs of rot so I "spot" sprayed SEAL-IT Wood Sealant and can see excellent results.

Interior of house has one coat of SEAL-IT Wood Sealant and one coat Benjamin-Moore clear interior varnish. No change since day it was done.